Home page

Component Parts - Principals

Component Parts Of A Gamet Tapered Roller Bearing

Gamet bearings consist of four basic components - the inner race (cone), the outer race (cup), tapered rollers and cage. The cone, rollers and cage form an assembly which is separable from the cup

Principals of Gamet Tapered Roller Bearings

The geometry of tapered roller bearings provides certain unique features: most importantly, the long line contact between roller and race gives high load carrying capacity and high bearing stiffness. The 'on apex' design ensures a true rolling motion of the rollers on the raceways, at every point along the roller body. See Fig 1. In addition, the tapered construction allows the bearing to carry combinations of radial and thrust load. The small seating force (x) produced at the rib aligns the rollers to prevent skewing. See Fig 2.


Fig 1
On-apex design results in true rolling motion at all points along the roller body.


Fig 2
Small seating force from the inner race rib keeps rollers aligned on the raceway.

Other Specific Features of Gamet Tapered Roller Bearings include

Precision - Gamet bearings are manufactured only in a high precision class (See Specials ).
Hollow Rollers - This assists the flow of lubricant through the bearing to provide cooling. Roller Roundness and Calibration - A true roundness of rollers ensures equal load sharing within the bearing and contributes significantly to the overall precision of the bearings. Gamet Rollers are ground between centres to achieve near perfect roundness. Rollers are then calibrated precisely into matched sets. Bearing Cage - The cage has a low coeficient of friction. It is guided on the inner race to provide radial stability and is designed to pass sufficient oil across the races to maintain lubrication, the remainder being diverted through the centre of the roller. Depending on rotational speed, grease lubrication may be used as an alternative to oil.